Sunrise Gold Filling
Sunrise Gold Series Wall putty is heavily pigmented VA based filler for surface preparation.
MAIN USES:
To fill pores and imperfections of plaster, concrete and gypsum surfaces. The product is easy to apply with applicator and provides ideal finish for subsequent coats
| COVERING CAPACITY | 13-15m?/ litter per oat (20-25 microns per coat) |
|---|---|
| SOLID (VOL%) | 42+2 |
| Colour | White |
| Finish | Matt |
| SPECIFIC GRAVITY | 1.50 - 1.70 |
THINNING:
Sunrise Special Emulsion requires thinning with clean water before use. The water should be added gradually with continued stirring. The amount of water to be added will depend upon the roughness and porosity of the surface and the rate of drying during application
APPLICATION:
Application Methods
Thinner/Cleaner
Thinning
Putty knife / trowel / scraper
Clean water
Not Required
PRECAUTIONS:
TIPS FOR SAFETY, ECONOMY AND ENVIRONMENTAL PRETECTION Keep paint container air tight after use and store in a shady & dry place Rinse with plenty of water in case of eye contact and seek medical advice Use skin cleaner to remove splashes and rollers before deaning Wash all equipment immediately after use water. Do not dispose-off-excess paint or paint waste into driers or watercourse disposal should be done in accordance with the environmental regulations
