Sunrise Mat Finish
Sunrise Matt Finish Enamel is a top of the line quality product. Made with our unique formula it provides a long lasting beautiful smooth finish with excellent coverage. It retains its exceptional properties throughout its long life and does not chip off or crack even after several years of severe exposure. It is stain resistant with a tough film it is a very long lasting product.
MAIN USES:
Specially designed for Kitchens, bathroom, stairways and corridors where cleaning of the walls is most required. Suitable for both interior and exterior. It can be used safely on any surface wood, metal, concrete, plaster, brick work and asbestos sheet surfaces.
| COVERING CAPACITY | 8 - 12m / litter per oat (20-25 microns per coat) |
|---|
DRYING TIME
| Surface Dry | 2-3 hours |
|---|---|
| Hard Dry | 24 hours |
| Recoatability | 16 hours |
| FInish | Matt |
| SOLID (VOL%) | 48 ‡ 2 |
| SPECIFIC GRAVITY | 1.20 - 1.40 |
THINNING::
Use good quality white spirit to thin Sunrise Red Oxide Primer, as required for brush or spray application.
SURFACE PREPARATION:
Preparation of the surface to be painted is most important. If surface is clean and firm, the new paint will look better, last longer and will go on more easily.
PRECAUTIONS:
Keep paint container air tight after use. Keep it away from open flame & heat. Where the painting is in progress ensure adequate ventilation.
CLEANING:
Clean all equipment with mineral turpentine (MTT) immediately after use.
APPLICATION:
Sunrise Matt Finish Enamel can be applied by brush, roller or spray. If required can be thinned by 10% good quality white spirit. Apply 2-3 coats, giving 16 hours between coats.
SURFACE PREPARATION:
TIPS FOR SAFETY, ECONOMY AND ENVIRONMENTAL PRETECTION: Keep the paint away from sources of ignition and avoid smoking. Where The painting is in progress ensure adequate ventilation. and invert the can for few seconds to seal the lid. It will help to prevent Skilling. Rinse with plenty of water in case of eye contact and seek medical advice. Use white spirit or skin cleaner to remove splashes for skin. scrape excess paint out of brushes and rollers before cleaning. wash all equipment immediately after use with white spirit. Shake excess liquid our after washing and then wrap them in a piece of clean cloth. Doing so will revive your brushes back to original.
