Sunrise Wall Filling
Sunrise Wall Filling is designed to fight out alkali moisture problems present in new or old masonry surfaces. Tough and flexible film of the binder discoverages the penetration of moisture and salt and this providing maximum protection to special Plastic Emulsion and Special Emulsion applied it.
FEATURES:
Provides smooth durable and washable silk finish. Specially designed for easy stain removal without affecting the paint properties. Has very low VOC which ensures good indoor air quality. Offers good flow, hiding power, Incan anti bacterial and colour retention properties. Has a striking combination of luxury and durability.
MAIN USES:
Used as filling coat on walls, ceilings and all other masonry surfaces before applying Sunrise Special Plastic Emulsion , Weather resist or Special Emulsion.
| Covering Capacity | 5-6 m / kg per Application |
|---|
Drying Time
| Surface Dry | 30 minutes |
|---|---|
| Hard Dry | 1-2 hours |
| Recoatability | 18 hours |
| SOLID (VOL%) | 42 ‡ 2 |
| SPECIFIC GRAVITY | 1.50 |
APPLICATION:
Apply Sunrise Wall Filling with scraper. Apply 2-3 coat as required let it dry for 8 hours. Once dried apply Sunrise Special Plastic Emulsion. Sunrise Weather Resist, or Sunrise Special Emulsion. Please note that filler on the exterior surfaces is not recommended use plaster/cement mix for removing surface defects.
SURFACE PREPARATION:
Ensure that the surface is fully dried & free from powdery material for the maximum adherison. It can be achieved by rubbing with abrasive paper followed by the remove of loose dust with solvent soaked cloth.When Completely dry apply one coat of Sunrise wall sealer and let it dry for 24 hours. It will completely fill the pours and holes in the surface and will make it non-permeable for moisture there by helps in achieving better coverage and surface finishing.
PRECAUTIONS:
TIPS FOR SAFETY, ECONOMY AND ENVIRONMENTAL PRETECTION Keep paint container air tight after use and store in a shady & dry place.Rinse with plenty of water in case of eye contact and seek medical advice. Use skin cleaner to remove splashes and rollers before deaning. Wash all equipment immediately after use water. Do not dispose-off-excess paint or paint waste into driers or watercourses disposal should be done in accordance with the environmental regulations
