Sunrise Gold Series Wall Sealer
Sunrise Gold Wall Sealer is designed to fight out alkali moisture problems present in new or old masonry surfaces. Tough and flexible film of the binder discoverages the penetration of moisture and salt and this providing maximum protection to special Plastic Emulsion and Special Emulsion applied it.
MAIN USES:
Used as filling coat on walls, ceilings and all other masonry surfaces before applying Sunrise Special Plastic Emulsion , Weather resist or Special Emulsion
COVERING CAPACITY | 12-10 m / Litre per coat |
---|
Hard Dry | 16 Hours |
---|---|
SOLID (VOL%) | 48+2 |
Surface Dry | 2-3 Hours |
Hard Dry | 1-2 hours |
Packing | 16 Litres 4 Litres 1 Litre |
Recoatability | 24 Hours |
SPECIFIC GRAVITY | 1.30 - 1.50 |
SURFACE PREPARATION:
Ensure that the surface is fully dried & free from powdery material which can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent soaked cloth.When completely dry apply one coat of Sunrise wall sealer and let it dry for 24 hours.
APPLICATION:
Thin Sunrise Wall Sealer with 10-15% good quality white spirit. Apply one coat and let it dry for overnight filling if required should be done with putty. let it dry before applying Sunrise Special Plastic Emulsion. Sunrise Weather All. and Sunrise Special Emulsion. Please note filling on the exterior surfaces is not recommended use plaster cement/ mix for removing surface defects.
PREPARATION OF FILLING:
Sunrise Wall Sealer is an excellent Binder for making wall Putty. Mix 3-4 parts of Sunrise Wall Sealer, with 4 parts of good quality chalk, 1 part of Lithopone. While preparing putty add small quantity of water. which will make the putty soft and it application much ensier.
