Exterior Wall Filling
Sunrise Exterior Wall Filing is based on styrene acrylic polymer; a unique polymer possessing, U.V Rays resisting properties. It also resists alkali and moistures which provides strong base for exterior emulsions.
MAIN USES:
Used as filling coat on exterior walls, followed with Sunrise Weather All coat.
COVERING CAPACITY | 4-5 m2 /kg per application |
---|---|
DRYING TIME | |
Surface Dry | 1-2 hours |
Hard Dry | 24 hours |
Recoatability | 18 hours |
Packing | 20Kg as per required |
APPLICATION:
Apply Sunrise Exterior Wall Putty with scraper. Apply 2-3 coats as required and let it dry for 8 hours. Once dried apply Sunrise Weather all.
SURFACE PREPARATION:
Ensure that the surface is fully dried & free from powdery material for the maximum adhesion. It can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent soaked cloth. When completely dry apply one coat of Sunrise Wall Sealer and let it dry for 24 hours. It will completely fill all the pours and holes in the surface and will make it non-permeable for moisture thereby helps in achieving better coverage and surface finishing.
PRECAUTIONS:
TIPS FOR SAFETY, ECONOMY AND ENVIRONMENTAL PRETECTION: Keep paint container air tight after use and store in a shady & dry place.Rinse with plenty of water in case of eye contact and seek medical advice. Use skin cleaner to remove splashes and rollers before deaning. Wash all equipment immediately after use water. Do not dispose-off-excess paint or paint waste into driers or watercourses disposal should be done in accordance with the environmental regulations.
