Sunrise Weather All
Sunrise Weather All includes silicon. We have also added another additive that provides coolant technology, giving the interior of the building up to 5 centigrade less heat as compared to the outside temperature. The covering capacity of our Weather All Paint is excellent, it contains the most effective chemicals enabling it to control mould growth. Special Pigments have been used to ensure maximum light fastness of colors. Sunrise Weather All is a very tough, durable exterior finish paint providing your exterior walls great protection, against all kinds of intense weather conditions.
MAIN USES:
Recommended for the use on all types of exterior masonry surfaces such as plaster, concrete, brick, pebble dash etc. It may also be used interior walls as superior finish paint.
| COVERING CAPACITY | 10-13m2 / liter per oat (20-25 microns per coat) |
|---|
DRYING TIME
| Surface Dry | 30 minutes |
|---|---|
| Hard Dry | 1-2 hours |
| Recoatability | 1-2 hours |
| SOLID (VOL%) | 40 ‡ 2 |
| SPECIFIC GRAVITY | 1.40 - 1.60 |
THINNING::
Sunrise Weather All required thinning with clean water before use. The water should be added gradually with continued stirring. High porosity surfaces will require more thinning as compared to low porosity surfaces, 2-3 litters water to 4 litters of Sunrise Weather All is advised.
APPLICATION:
Before use, mix thoroughly to ensure that all the colorants are evenly dispersed. Apply 2-3 coats of Sunrise Weather All allowing 1-2 hours between coats.
SURFACE PREPARATION:
New Plaster, Concrete, brick work: Ensure the surface is clean and dry. In case of mould & algae patches remove with hard brush and wash the surface with domestic bleach solution (1part bleach + 1 part water). After 3 days again wash surface with water to remove traces of Chlorine, let the surface dry. Apply one coat of Sunrise Primal-30, let it dry hard. Then apply 2 or 3 coat of Sunrise Weather All.
PREVIOUSLY EMULSION PAINTED SURFACE:
If the existing paint is sound, Sunrise Weather All Proof may be applied direct after normal cleaning. If the old paint is loose or flaking, defective material should be removed by scraping. Dust off the surface, apply one coat Primal-30, let it dry hard. Then apply 2 or 3 coats of Sunrise Weather All.
